USES                                                    
Major application areas of SAND HOLD VP 50 are.
1. Sand dune stabilization along Highways and other installations.
2.Bridge slopes.
3.Highway shoulders                       
4.Roads & deserts.
5.Runway shoulders in airports.
6.Residential, commercial or strategic installations or complexes
7.Foot traffic paths in deserts
8.Parking place for light vehicles
9.To stabilize coal dust stocks, flue dust etc against wind drift.
10. To provide a colored aerial view of trafficable or stabilized areas in desert land.

OUSTANDING FEATURES
1.SAND HOLD VP 50, once dried becomes transparent, hence leaves no color change to stabilized area.
2.Can be pigmented suitably to get desired shade for the applied area.
3.Dries fast and the applied area becomes usable in short time
4.Can be applied manually without the help of heavy machinery or equipment.
5.Completely environmental friendly, contains no hazardous materials.

APPLICATION                      
SAND HOLD VP 50 is to be diluted with water prior to application. Use an air assisted spray gun for the application. For fine to average dust control 1 part of SAND HOLD VP 50 to be diluted with 8 parts of water; spray the mix at a coverage rate of 6-9 Itr./sq. meter. For other special applications, application method can be finalised after evaluating the site conditions, purpose of application and other relevant factors.

STORAGE                              
Store above 5°C and below 30°C. Shelf life of six months can be expected in unopened containers, which will extend to one year if stored right.

PACKING 
20Kg. metal pails 200 Kg. metal drums.

EALTH & SAFETY
Generally safe, non-toxic and non-flammable v Bridge slopes whilst wet. However, avoid prolonged skin ~ Highway shoulders contact. Use of cream, gloves is advisable. !f eyes are affected by SRN~if iQti3, rinse wifn v Roads in deserts copious amount of clean water. If ingested, seek v Helipads medical attention immediately.