BPOCO PREMIERFLEX 2000

DESCRIPTION
PREMIERFLEX 2000 is an SBS modified bituminous waterproofing membrane reinforced with spun-bond polyester fabric. the combination gives the proven waterproofing qualities of bitumen combined elasticity excellent resistance to weathering and ease of application.

USES
PREMIERFLEX 2000 is a general purpose waterproofing membrane and is excellent in single layer roofing systems or as part of a multi-layer system.  When surfaced with granular slates PREMIERFLEX 2000 is ideal as an exposed top layer.

OUTSTANDING FEATURES
· Excellent cold weather resistance.
· High tensile strength and tear resistance.
- Good elongation and recovery.
- Very good puncture resistance
- Rot proof.
- Highly resistant to substrate movement.

STANDARDS
PREMIERFLEX 2000  complies with the requirements and tolerance levels of :
1. The American Societty For Testing & Material ASTM D-6164 Type I.
2.UEAtc (European Union of Technical Agreement).
3.MOAT 27-1983 and MOAT 30-1984.
4.CGSB (Canadian General Standards Board) 37-GP56M-July 1980.

INSTALLATION TOOLS REQUIRED
Gas torch, Knife, Trowel, Measuring tape, Marking string, Gloves.

APPLICATION
PREMIERFLEX 2000  is installed by torch welding method, loose-laid or fully bonded to substrate. When loose-laid, only laps are bonded together. Peripheries and protrusions are sealed according to specifications.

COVERAGE RATE

TORCHING GUIDELINES
The underside of the membrane should be torched just enough to superficially melt the bitumen. Excessive heating may damage the reinforcement. Overlaps should be re-heated from the top and resealed with a trowel to ensure seam integrity.

For details of installation methods and flashing requirements, consult the relevant BITUMAT Design and Installation Manual

FINISHES                              
PREMIERFLEX 2000  is available in two basic finishes: 
- Black smooth finish with polyethylene surfaces for covered applications.
- Granule surfacing for exposed applications.

QUALITY CONTROL
In addition to stringent regular tests by BITUMAT laboratory, our products are tested periodically by Bureau Veritas & SOCOTEC, Paris, France.

GENERAL DATA

TECHNICAL DATA - PREMIERFLEX 2000