USES
Generally recommended to be used as the first or base layer in multi-layer system below ground. Ideal in special applications such as wet-rooms where totally inert rot proof membrane is required. 

OUTSTANDING FEATURES
· Dimensional stability.
· Inert base layer in a multi-layer specification.
                                         .  

STANDARDS
GLASFLAME complies with the requirements and tolerance levels of :
1.UEAtc (European Union of Technical Agreement).
2.MOAT 27-1983 and MOAT 30-1984.
3.CGSB (Canadian General Standards Board) 37-GP56M-July 1980. 

INSTALLATION TOOLS REQUIRED
Gas torch, Knife, Trowel, Measuring tape, Marking string, Gloves.

APPLICATION
GLASFLAME is installed by torch welding method, loose-laid or fully bonded to substrate. When loose-laid, only laps are bonded together. Peripheries and protrusions are sealed according to specifications.

TORCHING GUIDELINES
The underside of the membrane should be torched just enough to superficially melt the bitumen. Excessive heating may damage the reinforcement. Overlaps should be re-heated from the top and resealed with a trowel to ensure seam integrity.

For details of installation methods and flashing requirements, consult the relevant BITUMAT Design and Installation Manual. 

FINISHES  
GLASFLAME is available in two basic finishes:
- Black finish with polyethylene surfaces for covered applications.
- Granule surfacing for exposed applications.
- Aluminum faced finish (3 mm only)                                         

QUALITY CONTROL
In addition to stringent regular tests by BITUMAT laboratory, our products are tested periodically by Bureau Veritas &  SOCOTEC, Paris, France.